The main stages on the linoleum flooring

Linoleum is a popular coating that can be used in residential, office premises, medical and children's institutions. The material is characterized by aesthetics, ease of installation and use.

Each floor repair begins with the preparation of the foundation. To do this, all the irregularities are removed. The base must be dry, clean and strong. With deep cracks, a coating of chipboard or fiberboard is made, mounted with nails. The joints are covered with putty.

If the linoleum is laid on a concrete base, then the irregularities are sealed with cement mortar. And only after 12 hours it is possible to continue the repair of the apartment. Thin linoleum is laid on a substrate.

Now let's consider the technology of how to lay linoleum. It is necessary to professionally cut the coating and cut the edges. When cutting, it is necessary to leave joints with a length of about 4 cm and a width of 1 cm for shrinkage. Then the sliced coating is marked, folded face down and laid down for 5 days. When cutting the canvas, it is necessary to lay it according to the following method: large ones – from below, and small ones - from above.

Uniform in color linoleum is laid with joints perpendicular to the outer walls, and multicolored – in the longitudinal direction with the combination of the pattern.

During "dry" installation, joints are formed, so the edges are nailed. When applying the coating, the edges must be cut off, and the back part smeared with glue. After 15 minutes, the canvas can be glued to the base. The other canvas should be overlapped with the first one by 2 cm. The glue can be applied with a brush or roller.

Sometimes old linoleum with a good surface remains in the apartments. It can be used as a substrate. If there are irregularities of the old surface, then they must be leveled with mastic and sanded after drying. After that, a new coating is laid.

Preparatory work

By choosing a suitable design, you can begin preparatory work on cleaning and leveling the walls. You should remove the old wallpaper with a spatula. If the coating is poorly removed from the surface, it is moistened with a special liquid or water.

It remains to make only glue. Usually manufacturers offer their own glue with instructions for its production to their products. Such solutions are suitable for pasting surfaces with photo wallpapers, they allow you to paste panels without gaps. Alternatively, you can use an adhesive solution for vinyl wallpaper. 24 betting app